Drive-Through Racking Systems in Pembroke Pines, FL
If your Pembroke Pines operation is dealing with a building with tight columns and limited room for more aisles, that is a storage design problem, not a leasing problem. Drive-In Rack is built for exactly that situation — it turns the unused clear height in a Pines Boulevard industrial building into working pallet positions instead of aisle.
We size the drive-through racking around your pallets, your lift trucks, and the clear height in your Pines Boulevard industrial building, factoring in bulk SKUs held deep while the pick face stays selective. You get a drawing and a line-item price for the Pines Boulevard industrial site, not a rough estimate. Call (954) 440-7435 and we will start a Pembroke Pines layout.
Why Pembroke Pines Warehouses Work With Us
Buildings around Pines Boulevard industrial and Taft Street corridor are rarely uniform. Column spacing, dock aprons, and usable height differ enough from one Pembroke Pines site to the next that a layout copied from another building wastes positions. Our team works around the I-75 freight access through southwest Broward constantly, so Pembroke Pines delivery runs and follow-up visits stay short.
That is part of why drive-in rack fits Pembroke Pines operations: the highest density available for a small number of SKUs. A short design consult tells you quickly whether that tradeoff works for your SKUs, or whether another system carries more of the load in a Pines Boulevard industrial footprint.
Being close to Pembroke Pines matters on the small things too: short delivery runs, a quick answer on a drive-in rack revision, and a documented layout for planning added bays.
Operations We Rack Around Here
Nearby areas we work in regularly include Pines Boulevard industrial, Taft Street corridor, I-75 freight access, West Pembroke Pines.
How Drive-In Rack Works
No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system.
Continuous rails, not beams
Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation.
The truck enters the lane
The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one.
One open end or two
One open end gives LIFO and the highest density available. Two open ends give FIFO with slightly fewer positions, since each lane now needs clearance from both sides.
Guarding built into the design
Guide rails, column guards, and rail-end protection are part of the spec from the start, because drivers work inside the structure and clear entry paths matter.
What a Drive-In Rack Project Includes
Every Pembroke Pines drive-in rack project begins with the numbers: what you store, how heavy it is, what lifts it, and how tall the usable space is. That Pembroke Pines conversation happens over the phone and usually takes about fifteen minutes.
From there our design team produces a CAD drive-in rack layout showing positions, elevations, and aisle widths for your Pembroke Pines floor plan, plus an itemized quote so you see cost per pallet position. Where it helps, we price a second configuration on the same plan, with the highest density available for a small number of SKUs, so the tradeoff between density and access is a number instead of an opinion. Load ratings for each drive-in rack level are documented in the Pembroke Pines drawing, not guessed in the field.
New drive-in rack delivery timing is confirmed on the quote, and we stage deliveries to match your Pines Boulevard industrial dock. Experienced installation crews we schedule and manage set the system anchored to the floor to the Pembroke Pines drawing, verify it loaded, and tag capacities. Work is sequenced zone by zone so Pembroke Pines receiving and shipping never stop, and we stay reachable for drive-in rack parts, added lanes, and future additions.
Recent Installations
Racking projects completed for warehouses across Broward, Miami-Dade, and Palm Beach counties.
Get a Drive-In Rack Quote for Your Pembroke Pines Warehouse
Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (954) 440-7435.
Fort Lauderdale Pallet Rack
2831 E Oakland Park Blvd.
Ste 9 #3144
Fort Lauderdale, FL 33306
(954) 440-7435Monday - Friday: 8:00 AM - 6:00 PM
Drive-In Rack Questions We Hear Most
Other Rack Types We Supply in Pembroke Pines
Pallet Rack
Every pallet reachable, every time. The baseline we size everything else against.
View details
Pushback Rack
Two to six pallets deep from one aisle, without giving up much reach.
View details
Pallet Flow Rack
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Cantilever Rack
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View details
Carton Flow Rack
Cases advance to the picker instead of the picker hunting for cases.
View detailsNearby Areas We Also Serve
Our delivery and installation territory covers Broward, Miami-Dade, and Palm Beach counties, so one team can handle multiple buildings for the same company.
Where We Work
Located in Fort Lauderdale, we serve all of South Florida with industrial pallet racks and warehouse storage solutions.
Fort Lauderdale Pallet Rack
Address
2831 E Oakland Park Blvd.
Ste 9 #3144
Fort Lauderdale, FL 33306
Phone
(954) 440-7435Business Hours
Monday - Friday: 8:00 AM - 6:00 PM
Saturday: Closed
Sunday: Closed
Need Drive-In Rack in Pembroke Pines?
Call (954) 440-7435 or request a quote and we will get a layout started.